The D2P series controls are proportional, infinitely variable power controller capable of delivering 1-98% of the applied line voltage to the directly connected electric heaters. This is accomplished by phase angle firing a dual SCR module. The D2P will control heaters with high inrush current (tungsten lamps), The D2P will not control transformers or motors.

1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Voltage Designations

Load

Operating Temperature (Ambient)

Output Voltage

CAD

N/A D2P-12-40 Series Manual Potentiometer TRIAC Power Controller N/A 120 VAC 50/60 Hz N/A 40 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-12-60 Series Manual Potentiometer TRIAC Power Controller N/A 120 VAC 50/60 Hz N/A 60 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-24-40 Series Manual Potentiometer TRIAC Power Controller N/A 208 to 240 VAC 50/60 Hz N/A 40 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-24-60 Series Manual Potentiometer TRIAC Power Controller N/A 208 to 240 VAC 50/60 Hz N/A 60 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-38-40 Series Manual Potentiometer TRIAC Power Controller N/A 380 VAC 50/60 Hz N/A 40 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-38-60 Series Manual Potentiometer TRIAC Power Controller N/A 380 VAC 50/60 Hz N/A 60 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-48-40 Series Manual Potentiometer TRIAC Power Controller N/A 480 VAC 50/60 Hz N/A 40 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
N/A D2P-48-60 Series Manual Potentiometer TRIAC Power Controller N/A 480 VAC 50/60 Hz N/A 60 AMPS N/A 0 to 50 ºC122 ºF N/A 1 to 97% of supply voltage N/A CAD Icon (for items table)
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1